PAMIĘCI NIEULOTNE EEPROM W TECHNOLOGII IBUTTON

Kod produktu: DS1971-F5#

The DS1971 256-bit EEPROM iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware: for example, a single port pin of a microcontroller. The DS1971 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (14H) plus 256 bits of EEPROM. The power to program and read the DS1971 is derived entirely from the 1-Wire communication line. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The 48-bit serial number that is factory-lasered into each DS1971 provides a guaranteed unique identity which allows for absolute traceability. The durable MicroCan package is highly resistant to harsh environments such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with cup-shaped receptacles, allowing the DS1971 to be used easily by human operators or automatic equipment. Accessories permit the DS1971 to be mounted on printed circuit boards, plastic key fobs, photo-ID badges, ID bracelets, and many other objects. Applications include work-in-progress tracking, electronic travelers, access control and storage of calibration constants.

Właściwości:

  • 256-bit Electrically Erasable Programmable Read Only Memory (EEPROM) communicates with the economy of one signal plus ground
  • EEPROM organized as one 256-bit page
  • 64-bit one-time programmable application register is automatically write-protected after programming
  • Reduces control, address, data, power, and programming signals to a single data pin
  • 8-bit family code specifies DS1971 communications requirements to reader
  • Reads and writes over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C

Dokumentacja układu DS1971 (w j. angielskim)

Strona producenta związana z produktem

Oprogramowanie, sterowniki, dodatkowe informacje

 

Kod produktu: DS1973-F5#

The DS1973 4Kb EEPROM iButton is a rugged read/write data carrier that identifies and stores relevant information about the product or person to which it is attached. This information can be accessed with minimal hardware, for example a single port pin of a micro-controller. The DS1973 consists of a factory-lasered registration number that includes a unique 48-bit serial number, an 8-bit CRC, and an 8-bit Family Code (23H) plus 4096 bits of EEPROM. The power to program and read the DS1973 is derived entirely from the 1-Wire communication line. The memory is organized as sixteen pages of 256 bits each. The 64-bit registration number provides a guaranteed unique identity which allows for absolute traceability. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The durable MicroCan package is highly resistant to harsh environments such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with cup-shaped receptacles, allowing the DS1973 to be used easily by human operators or automatic equipment. Accessories permit the DS1973 to be mounted on printed circuit boards, plastic key fobs, photo-ID badges, ID bracelets, and many other objects. Applications include work-in-progress tracking, electronic travelers, access control and storage of calibration constants.

Właściwości:

  • 4096 bits Electrically Erasable Programmable Read Only Memory (EEPROM)
  • Overdrive mode boosts communication speed to 142 kbits per second
  • 256-bit scratchpad ensures integrity of data transfer
  • Memory partitioned into 256-bit pages for packetizing data
  • Reduces control, address, data and power to a single data pin
  • 8-bit family code specifies DS1973 communication requirements to reader
  • Reads and writes over a wide voltage range of 2.8V to 6.0V from -40°C to +85°C

Dokumentacja układu DS1973 (w j. angielskim)

Strona producenta związana z produktem

Oprogramowanie, sterowniki, dodatkowe informacje

 

Kod produktu: DS1977-F5

The DS1977 is a 32KB EEPROM in a rugged iButtonR enclosure. Access to the memory can be password protected with different passwords for read-only and full access. Data is transferred serially through the 1-WireR protocol, which requires only a single data lead and a ground return. Every DS1977 is factory lasered with a guaranteed unique 64-bit registration number that allows for absolute traceability. The durable stainless-steel iButton package is highly resistant to environmental hazards such as dirt, moisture, and shock. Accessories permit the DS1977 iButton to be mounted on almost any object, including containers, pallets, and bags.

Właściwości:

  • 32KB EEPROM Organized as Pages of 64 Bytes Each
  • Optional Password Protection with Different 64-Bit Passwords for Read and Full Access
  • Communicates to Host with a Single Digital Signal at Up to 15.3kbps at Standard Speed or Up to 125kbps in Overdrive Mode Using 1-Wire Protocol
  • Operating Range: 2.8V to 5.25V, -40°C to +85°C
  • Minimum 100k Write Cycles Endurance
  • 15kV Built-in ESD Protection

Zastosowania:

  • Audit Data Storage and Carrier
  • Health Data Carrier
  • Maintenance/Inspection Data Storage
  • Medical Data Carrier

Dokumentacja układu DS1977 (w j. angielskim)

Strona producenta związana z produktem

Oprogramowanie, sterowniki, dodatkowe informacje

 

Kod produktu: DS1996L-F5

The DS1996 Memory iButton is a rugged read/write data carrier that acts as a localized database that can be easily accessed with minimal hardware. The nonvolatile memory offers a simple solution to storing and retrieving vital information pertaining to the object to which the iButton is attached. Data is transferred serially via the 1-Wire protocol which requires only a single data lead and a ground return. The scratchpad is an additional page that acts as a buffer when writing to memory. Data is first written to the scratchpad where it can be read back. After the data has been verified, a copy scratchpad command will transfer the data to memory. This process ensures data integrity when modifying the memory. A 48-bit serial number is factory lasered into each DS1996 to provide a guaranteed unique identity which allows for absolute traceability. The durable MicroCan package is highly resistant to environmental hazards such as dirt, moisture, and shock. Its compact button-shaped profile is self-aligning with mating receptacles, allowing the DS1996 to be easily used by human operators. Accessories permit the DS1996 to be mounted on almost any surface including plastic key fobs, photo-ID badges and printed circuit boards. Applications include access control, work-in-progress tracking, electronic travelers, storage of calibration constants, and debit tokens.

 

This product contains lithium-metal batteries.

Właściwości:

  • 65536 bits of read/write nonvolatile memory
  • Overdrive mode boosts communication speed to 142 kbits per second
  • 256-bit scratchpad ensures integrity of data transfer
  • Memory partitioned into 256-bit pages for packetizing data
  • Data integrity assured with strict read/write protocols
  • Operating temperature range from -40°C to +70°C
  • Over 10 years of data retention

Dokumentacja układu DS1996 (w j. angielskim)

Strona producenta związana z produktem

Oprogramowanie, sterowniki, dodatkowe informacje